Pro 3 Distributors

Safety Siren™ Pro Series 3 - Radon Gas Detector

· Evaluated and approved by US EPA

· Accuracy is better than EPA requirements for charcoal radon test devices. (EPA requirement: Device must be accurate to +-25% of actual value)

· Factory calibrated

· A radon monitor that monitors radon every hour of every day of the year. Samples air continuously with the display updated every hour.

· A failsafe self-test is conducted every 24 hours with an error code displayed if there is a failure.

· Excellent 1 year warranty

· Digital readout .1 to 999.9 pCi/L

· Resolution is .1 pCi/L

· No waiting for test results from a remote laboratory. First reading displayed after 48 hours.

· Audible Alarm sounds if:

o The long-term measurement reaches 4 pCi/L (150 Becquerels per cubic metre) or greater.

o The short-term measurement stays above 4 pCi/L for 30 consecutive days.

o Alarm can be disabled or reactivated.

· 10 foot power cord allows user to locate detector away from walls, windows and doors.

· Menu button controls 4 functions.

§ Allows the user to switch between the short-term and long-term display, which is indicated by a green LED illuminated next to the S (short-term) or L (long-term).

§ Allows the user to conduct a manual test of the detector.

§ Allows the user to mute or reactivate the audible alarm if the detector is in an alarm state.

§ Allows the user to clear and reset the memory of the detector to begin new readings.

· Long-term readings display the average radon levels since powered-up or last reset with a maximum reading time of 5 years.

Why rent a monitor or pay for random testing services when you can monitor for the presence of Radon year round at a very reasonable cost?

Price at: $159.00

Plus $40.00 S & H (Pick up is available)
Plus GST and PST

Order by:

Phone: 306 536 1799

Fax: 306 789 3083

Online*:

International Customers:

Saskatchewan Customers:

Download Fax Order Form

We accept Cheques, Cash, Visa, MasterCard and PayPal

*Our shopping cart requires cookies to be enabled. Please enable cookies in the setting of your browser.

We will place 2 devices in mutually agreed areas of a home for 5 to 7 days. We will then document the process and findings along with reference material for the client. Pro3 Distributors will not make any recommendations or referrals.

Most companies test only one area of the building at a time. We believe that by using two monitors better information is obtained over a shorter period of time. Remember calibration of any unit can be +/- 20% and the requirement for conformation retesting should not be necessarily in most cases when 2 units are used in the same location.